• Broadcan Netxtreme Gigabit Ethernet Driver Windows 10 free download - Network:Broadcom NetXtreme Gigabit Ethernet Driver Version A00, Broadcom NetXtreme Gigabit Ethernet for hp, Realtek RTL.
• BCM57XX on OS X This driver was made possible because of Miezes patches for AppleBCM5701Ethernet.kext. His explanation of the patches showed that only the PCI configuration space ID needed to be spoofed. A wide range of Broadcom network adapters can be supported OOB on OS X, without any kext patc.

• Broadcom Netxtreme Gigabit Ethernet Download
• Broadcom Netxtreme Gigabit Ethernet Drivers

• Similar Content

  • By genzai
    

    Hello Mieze,
    Here are the results of my testing:
    First i used an SSDT to inject my i211 and give it the i210 device ID (8086,1533). This appears to be what the driver looks for as it only has an IOPCIPrimaryMatch value in the info plist. after a few tries the SSDT appeared to work and IOJones showed the correct 1533 device ID. The driver did not load however.
    Leaving the SSDT in place i then went about creating a FakePCIID kext. I based it off the 'BCM57XX as BCM57765' kext that is packaged with FakePCIID. Once I got this working, i then saw both network controllers. EN0(i219) and EN2(i210) -- not sure where EN1 went but thats probably not relevant.
    Both controllers showed as loaded everywhere i checked--
    -System Profile showed them both under Ethernet devices, with the proper kexts associated (i211, reported as i210 with AppleIntelI210Ethernet loaded, and i219 with intelMausiEthernet loaded.
    - Network utility showed both devices and EN#
    - DPCImanger showed both devices under its network list
    - IOJones seemed to show both fully loaded with a lot of details under each entry
    - and there was a new entry for 'Ethernet 2' in System Preferences>Network
    However despite all this the i211 port would only show as inactive in system preferences and never showed any sign of life when connected to the network (other than physical LEDs blinking). Furthermore (and very perplexing to me) with I210 'enabled' my i219 controller was also not working. It also showed a red inactive status in network preferences when it should be connected. Another odd thing is that Network Utility seemed to report activity for the i219 (though not the i210) but there was no way to get the OS to otherwise recognize either controller as connected let alone passing traffic.
    Removing the FakePCIID kexts brought my i219 back to life but now i am back to square one.
    Thoughts?
    Thanks!
    g
    
  • By felixaa
    

    Following thread http://www.insanelymac.com/forum/topic/292117-broadcom-bcm57781-how-do-i-patch-the-kext-for-ml-1085/
    was imposible find instructions patterns refered by @Mieze using 'Hopper Disassembler' on AppleBCM5701Ethernet.kext(ver: 10.1.2b3)
    One user on this post: http://www.hackintoshosx.com/files/file/4270-kextstopatch-clover-broadcom-bcm57781-for-yosemite-1010-1012b3/
    claim that is posible patch on-the-fly with Clover but I can´t not find his HEX´s pattern on AppleBCM5701Ethernet binary.
    Any light on this?
    
  • By tanner
    

    I have successfully installed OS X Mavericks onto my Asus Zenbook UX302LA laptop and have almost everything working, except for the following:
    Not Working:
    Wifi( Intel N 7260, Device Instance Path: PCIVEN_8086&DEV_08B1&SUBSYS_C0708086&REV_6B4&33C43F56&0&00E3)
    Two finger scroll
    Touchscreen( Unknown driver)
    Brightness Controls
    Below, I have attached the driver for the N 7260 on Linux, which can possibly be ported to Mac OS X. If the driver cannot be ported, I could add my device ID somehow. If this is all not possible, then I suppose I could use one of my PCIE WIfi cards from another computer.
    Thanks.
    http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=get&target=iwlwifi-7260-ucode-22.15.8.0.tgz
    

I'm trying to get my local MAC address changed for Broadcom NetXtreme 57xx adapter in D620 running winXP. Based on Broadcom advice this should be pretty straightforward: In Microsoft Windows, right-click the Network Adapter in Network Connections and then click Properties. Click the Configure button and then the General tab.

Broadcom Netxtreme Gigabit Ethernet Download

Broadcom Netxtreme Gigabit Ethernet Drivers